Worktop cutting jig

Cuts standard left and right hand joints, corner joints and peninsular joints in worktops up tp 900mm width. Enables recess to be cut for worktop joint clamps. Tradesman ALL IN ONE work top jig for up to 900mm worktops.

Engraved lines for short 65mm bolts and worktop cross-cut. Three open-ended bolt recesses . Selection of worktop jigs, jigs, and non slip router mats. The holes marked F are for use when cutting female joints, those marked M for use when cutting male joints and .

To fit your kitchen worktop and achieve tight joints you will need to . Ensure jig is firmly secured to the worktop. Clear all obstructions from the path of the router. Never exceed 10mm depth of cut in one pass. The variable angle insert can be attached to the jig to enable the user to cut worktops to an angle other than degrees. Double ende cuts right angle joints.

We also sell Economy Belfast Sink Jig and Economy Drainer Jig for cutting . The jig can be used to fit 90° corners for worktops of widths 600mm and 6mm. The cutter must always enter the worktop through the postformed edge, .

Find this and more joinery equipment hire and rent in Edinburgh, Glasgow and . Cutting Bolt Recess Slots for Female 90° Connecting Bolt. The bolt recess should be approximately 20mm deep for 30mm worktop and 28mm deep for 40mm worktop. This worktop jig provides templates for and degree male and female cuts. Worktop Router Jig Instuction Manual. Application: Routing, kitchens, bathrooms and worktops.

We supply trade quality DIY and home improvement products at great low . Additional equipment required to successfully use this jig. I am fitting my own kitchen worktops. This jig produces perfectly mitred joints easily and without waste. Unika Multi-Surface worktop Jig cuts 10mm inset for Composite, Solid Wood and Square Edge worktops up to 10mm and 23mm inset for Standard Laminate . The router is ideal for rebating, grooving and recessing work in workshops or on-site.

The jig is invaluable for worktop fitting and has multiple functions: female . If used and looked after correctly each jig will last in excess of 3cuts. Faithfull standard jig for installing worktops.